张安峰,李涤尘,梁少端,等.高性能金属零件激光增材制造技术研究进展[J].航空制造技术,2016(22):16-22.ZHANG A F,LI D C,LIANG S D,et al.Research progress of laser additive manufacturing technology for high performance metal parts[J].Aviation Manufacturing Technology,2016(22):16-22.(in Chinese)

澹台凡亮,田洪芳,顾振杰,等.钢厂扁头套激光增材再制造工艺及实验研究[J].热喷涂技术,2018,10(4):80-86.DANTAI F L,TIAN H F,GU Z J,et al.Remanufacturing technology and experimental research oflaser additive for flat head cover in steel works[J].Thermal Spraying Technology,2018,10(4):80-86.(in Chinese)

封慧,李剑峰,孙杰.曲轴轴颈损伤表面的激光熔覆再制造修复[J].中国激光,2014,41(8):86-91.FENG H,LI J F,SUN J.Laser cladding and remanufacturing repair of damaged surface of crankshaft journal[J].China Laser,2014,41(8):86-91.(in Chinese)

田万鹏.X80管线钢接头的焊接温度场及应力应变场的数值模拟[D].株洲:湖南工业大学,2015.TAIN W P.Numerical simulation of welding temperature field and stress-strain field of pipeline steel joint[D].Zhuzhou:Hunan University of Technology,2015.(in Chinese)

苑晓菲.激光表面熔覆理论研究与数值模拟[D].沈阳：东北大学,2014.YUAN X F.Theoretical study and numerical simulation of laser cladding[D].Shenyang:Northeastern University,2014.(in Chinese)

钦兰云,王维,杨光.超声辅助钛合金激光沉积成形试验研究[J].中国激光,2013,40(1):82-87.QIN L Y,WANG W,YANG G.Experimental study on ultrasonic assisted laser deposition of titanium alloy[J].China Laser,2013,40(1):82-87.(in Chinese)

LEUDERS S,THONE M,Riemer A,et al.On the mechanical behaviour of titanium alloy Ti Al6V4 manufactured by selective laser melting:Fatigue resistance and crack growth performance[J].International Journal of Fatigue,2013,48:300-307.

徐滨士,董世运,史佩京.中国特色的再制造零件质量保证技术体系现状及展望[J].机械工程学报,2013,49(20):84-90.XU B S,DONG S Y,SHI P J.Present situation and prospect of quality assurance technology system for remanufactured parts with Chinese characteristics[J].Journal of Mechanical Engineering,2013,49(20):84-90.(in Chinese)

王明瑜.B2模具钢激光熔覆层微观组织与疲劳性能的研究[D].长春：吉林大学,2015.WANG M Y.Study on microstructure and fatigue properties of laser cladding layer of B2 die steel[D].Changchun:Jilin University,2015.(in Chinese)

李美艳,韩彬,王勇,等.超声振动对激光熔覆Ni55涂层组织及性能影响[J].材料热处理学报,2015,36(10):199-203.LI M Y,HAN B,WANG Y,et al.Effect of ultrasonic vibration on microstructure and properties of laser cladding Ni55 coating[J].Journal of Material Heat Treatment,2015,36(10):199-203.(in Chinese)

余本海,胡雪惠,吴玉娥,等.电磁搅拌对激光熔覆WC-Co基合金涂层的组织结构和硬度的影响及机理研究[J].中国激光,2010,37(10):2672-2677.YU B H,HU X H,WU Y E,et al.Effect of electromagnetic stirring on microstructure and hardness of laser cladding WC Co based alloy coating and its mechanism[J].China Laser,2010,37(10):2672-2677.(in Chinese)

于群,王存山.电磁搅拌辅助Ni45合金的激光增材制造[J].中国激光,2018,45(4):154-164.YU Q,WANG C S.Laser additive manufacturing of Ni45 alloy assisted by electromagnetic stirring[J].China Laser,2018,45(4):154-164.(in Chinese)

许可可,陈克选,仇文杰,等.等离子弧增材制造设备与其工艺研究[J].热加工工艺,2017,46(23):221-224.XU K K,CHEN K X,CHOU W J,et al.Study on manufacturing equipment and technology of plasma arc additive[J].Hot Working Process,2017,46(23):221-224.(in Chinese)

王启伟,朱胜,陈春良,等.能束能场增材再制造技术的研究进展[J].中国表面工程,2018,31(6):1-8.WANG Q W,ZHU S,CHEN C L,et al.Research progress on remanufacturing technology of beam field additive[J].China Surface Engineering,2018,31(6):1-8.(in Chinese)

张瑞珠,李林杰,唐明奇.激光熔覆技术的研究进展[J].热处理技术与装备,2017,38(3):7-11.ZHANG R Z,LI L J,TANG M Q,et al.Research progress of laser cladding technology[J].Heat Treatment Technology and Equipment,2017,38(3):7-11.(in Chinese)

刘干成,黄博.小模数齿轮齿面双道激光熔覆工艺[J].中国激光,2019,46(10):163-173.LIU G C,HUANG B.Double channel laser cladding technology of small module gear tooth surface[J].China Laser,2019,46(10):163-173.(in Chinese)

任维彬,董世运,徐滨士,等.压缩机叶片激光再制造成形闭环控制设计与实现[J].焊接学报,2018,39(3):11-15+129.REN W B,DONG S Y,XU B S,et al.Design and implementation of closed-loop control for laser remanufacturing of compressor blades[J].Welding Journal,2018,39(3):11-15+129.(in Chinese)

李英男,李铸国,王晓翔,等.道岔尖轨激光熔覆铁基耐磨涂层及其性能[J].中国激光,2020,47(4):130-140.LI Y N,LI Z G,WANG X X,et al.Laser cladding of iron-based wear-resistant coating on switch rail and its properties[J].China Laser,2020,47(4):130-140.(in Chinese)

郑坤.铌合金电子束熔覆成形及热作用仿真研究[D].哈尔滨:哈尔滨工业大学,2012.ZHENG K.Simulation of electron beam cladding and thermal effect of Nb alloy[D].Harbin:Harbin Institute of Technology,2012.(in Chinese)

HIDEKI HAMATANI,YASUNOBU MIYAZAKI.Optimization of an electron beam remelting of HVOF sprayed alloys and carbides[J].Surface and Coatings Technology,2002,154(2):176-181.

ZENKER R,SACHER G,BUCHWALDER A,et al.Hybrid technology hard coating-Electron beam surface hardening[J].Surface and Coatings Technology,2007,202(4):804-808.

陆斌锋,唐普洪,芦凤桂,等.激光与电子束熔覆(Cr,Fe) 7C 3复合层组织及耐磨性对比[J].中国表面工程,2014,27(4):76-81.LU B F,TANG P H,LU F G,et al.Comparison of microstructure and wear resistance of (Cr,Fe) 7C 3 composite layer by laser and electron beam cladding[J].China Surface Engineering,2014,27(4):76-81.(in Chinese)

张洁.等离子熔覆再制造发动机缸盖的组织及性能研究[D].西安:西安理工大学,2019.ZHANG J.Study on microstructure and properties of plasma cladding remanufactured engine cylinder head[D].Xi’an:Xi’an University of Technology,2019.(in Chinese)

赵继圆.氩弧熔覆制备Ti基Ti 5Si 3表面层组织性能研究[D].长春：吉林大学,2008.ZHAO J Y.Microstructure and properties of Ti based Ti 5Si 3 surface layer prepared by argon arc cladding[D].Changchun:Jilin University,2008.(in Chinese)

SUSUMU UOZATO,KAZUHIRO NAKATA,MASAO USHIO.Evaluation of ferrous powder thermal spray coatings on diesel engine cylinder bores[J].Surface and Coatings Technology,2005,200(7):2580-2586.

郭峰.镁合金凝固组织的超声细化机制及工艺研究[D].南昌:南昌大学,2008.GUO F.Study on Ultrasonic Refining Mechanism and technology of solidification structure of magnesium alloy[D].Nanchang:Nanchang University,2008.(in Chinese)

张安峰,付涛,王潭,等.超声振动对激光熔覆及固溶时效Ti6Al4V合金组织和性能的影响[J].中国激光,2018,45(12):85-90.ZHANG A F,FU T,WANG T,et al.Effect of ultrasonic vibration on Microstructure and properties of laser cladding and solution aged Ti6Al4V alloy[J].China Laser,2018,45(12):85-90.(in Chinese)

CUI Z Q,QIN Z,DONG P,et al.Microstructure and corrosion properties of Fe Co Ni Cr Mn high entropy alloy coatings prepared by high speed laser cladding and ultrasonic surface mechanical rolling treatment[J].Materials Letters,2020,259:126769.

李美艳,蔡春波,韩彬,等.预热对激光熔覆陶瓷涂层温度场和应力场影响[J].材料热处理学报,2015,36(12):197-203.LI M Y,CAI C B,HAN B,et al.Effect of preheating on temperature field and stress field of laser cladding ceramic coating[J].Journal of Material Heat Treatment,2015,36(12):197-203.(in Chinese)

ZHOU S F,HUANG Y J,ZENG X Y,et al.Microstructure characteristics of Ni-based WC composite coatings by laser induction hybrid rapid cladding[J].Materials Science and Engineering A,2008,480(1):564-572.

黄永俊,曾晓雁,胡乾午,等.激光感应复合熔覆的稀释率分析模型及实验研究[J].应用光学,2008(2):248-252.HUANG Y J,ZENG X Y,HU Q W,et al.Dilution analysis model and experimental study of laser induced cladding[J].Applied Optics,2008(2):248-252.(in Chinese)

祁贵云.旋转磁场作用下电弧特性和电弧行为的研究[D].北京:北京工业大学,2004.QI G Y.Study on arc characteristics and behavior under the action of rotating magnetic field[D].Beijing:Beijing University of Technology,2004.(in Chinese)

刘海华,白云龙,卓义民,等.外加电磁场辅助焊接技术的研究现状[J].焊接,2017(10):12-18+73.LIU H H,BAI Y L,ZHUO Y M,et al.Research status of welding technology assisted by external electromagnetic field[J].Welding,2017(10):12-18+73.(in Chinese)