周达飞.材料概论（第二版）[M].北京：化学工业出版社,2012.ZHOU D F.Introduction to materials(2nd edition)[M].Beijing:Chemical industry press,2012.(in Chinese)

陈芙蓉,李国伟.7075铝合金的研究现状[J].机械制造文摘(焊接分册),2019(1):1-7.CHEN F R,LI G W.Research status of 7075 aluminum alloy[J].Mechanical manufacturing abstract(welding volume),2019(1):1-7.

卢江.短电弧加工机理研究[D].乌鲁木齐:新疆大学,2011.LU J.Research on mechanism of short arc processing[D].Urumqi:Xinjiang university,2011.(in Chinese)

徐成龙,仲梁维.航空铝合金薄壁件加工变形控制研究[J].农业装备与车辆工程,2019,57(3):113-116.XU C L,ZHONG L W.Research on deformation control of aircraft aluminum alloy thin-wall parts[J].Agricultural equipment and vehicle engineering,2019,57(3):113-116.(in Chinese)

许以浩,周建平,许燕,等.基于双闭环PI控制的短电弧加工脉冲电源设计[J].新疆大学学报(自然科学版),2017,34(2):242-247.XU Y H,ZHOU J P,XU Y,et al.Design of short arc processing pulse power supply based on double closed loop PI control[J].Journal of xinjiang university(natural science edition),2017,34(2):242-247.(in Chinese)

许燕,王博,周建平.镍基高温合金短电弧加工工艺参数优化[J].机床与液压,2018,46(11):106-110.XU Y,WAN G B,ZHOU J P.Optimization of short arc machining process parameters of nickel-based superalloy[J].Machine tool&hydraulics,2008,46(11):106-110.(in Chinese)

朱晨光,周建平,汪兵兵.镍基高温合金脉冲电弧加工表面完整性研究[J].机床与液压,2015,43(11):27-29+33.ZHU C G,ZHOU J P,WANG B B.Study on surface integrity of pulse arc machining of nickel-based superalloy[J].Machine tool&hydraulics,2015,43(11):27-29+33.(in Chinese)

ZHOU J P,LIANG C H,TENG W J,et al.Study on Rules in Material Removal Rate and Surface Quality of Short Electric Arc Machining Process[J].Advanced Materials Research,2008,29(33-37):1313-1318.

邱荣贤.7075铝合金电火花线切割表面完整性影响规律研究[D].长春：长春理工大学,2017.QIU R X.Study on the influence of surface integrity of 7075 aluminum alloy edm[D].Changchun:changchun university of science and technology,2017.(in Chinese)

殷静凯,李文斌.电火花线切割加工Cr12Mo V的参数优化[J].机械设计与制造,2016(2):248-250+254.YIN J K,LI W B.Parameter optimization of edm Cr12Mo V[J].Mechanical design and manufacturing,2016(2):248-250+254.(in Chinese)

邓鹏.钛合金Ti-6Al-4V电火花线切割参数试验研究[D].太原：太原理工大学,2016.DENG P.Experimental study on parameters of ti-6al-4v edm in titanium alloy[D].Taiyuan:Taiyuan university of technology,2016.(in Chinese)

何巍杨.工艺参数对短电弧铣削加工性能影响规律研究[D].乌鲁木齐：新疆大学,2018.HE W Y.Study on the influence of process parameters on the machining performance of short arc milling[D].Urumqi:Xinjiang university,2018.(in Chinese)